Adss Opgw Down Lead Clamp Opgw Down Lead Clamp Adss Opgw Rubber Down Lead Clamp
Description
Downlead clamps are used to guide optical ground wire (OPGW) from the top of the structure to the splice box. AFL’s downlead clamps install easily, provide proper
spacing and hold strength without damage to the cable. From poles to towers, AFL offers a full line of OPGW downlead clamps to meet the needs of any application.
Features
- Slip strength: >100lbs.
- Lattice adapters provided with break-away bolts for precise torque during installation
- Steel tower guide clamps available with adapters to eliminate the need for drilling
- Banding adapters available
Application
It is installed to down-lead or jump-joint cables on terminal tower /pole or splice joint tower/pole. it was commonly installed every 1.5- 2m / set.
Specification
two models optional: 10-14mm and 13-17mm.
materials: Parallel groove damp— ageing-resistant rubber or aluminum alloy
Stainless steel hoop—Aluminum alloy support — Galvanized U-shaped steel
| Model | Structure type | available cable diameter (mm) | Quality (kg) | Remark |
| ZXOFC-0100 | hot-dip galvanizing | 6.9-10.0 | 0.8 | Tower used |
| ZXOFC-0130 | hot-dip galvanizing | 10.1-13.0 | 0.8 | Tower used |
| ZXOFC-0160 | hot-dip galvanizing | 13.1-16.0 | 0.8 | Tower used |
| ZXOFC-0190 | hot-dip galvanizing | 16.1-19.0 | 0.8 | Tower used |
| ZXOFC-0220 | hot-dip galvanizing | 19.1-22.0 | 0.8 | Tower used |
| ZXOFC-0100 | Steel Strip | 6.9-10.0 | 0.55 | Pole used |
| ZXOFC-0130 | Steel Strip | 10.1-13.0 | 0.55 | Pole used |
| ZXOFC-0160 | Steel Strip | 13.1-16.0 | 0.55 | Pole used |
| ZXOFC-0190 | Steel Strip | 16.1-19.0 | 0.55 | Pole used |
| ZXOFC-0220 | Steel Strip | 19.1-22.0 | 0.55 | Pole used |
Packing & Shipping
