Power Accessories Aerial Line ADSS Suspension Clamp
Description
helical suspension clamp for ADSS Cable
ADSS preformed suspension clamp is mainly used to support the suspend ADSS cable. It is suitable for the ADSS cable, conductor and grounding
wire on transmission line. It is recommended used on the line with turning angle less than 30 degree.
This helical suspension clamp is the connecting fitting that hangs ADSS cable onto the poles/tower in
the transfer line, the clamp can decrease the static stress of cable at hanging point, improve anti vibration capacity and restrain dynamical stress
caused from wind vibration. It also can ensure that the cable bend doesn't exceed allowable value and cable doesn't generate bend stress. By
installing this clamp, the various harmful stress concentrations can be avoided, so the additional damage wastage shall not occur in the optical
fiber within the cable.
For example
It is specifically designed for ADSS cable with span not more than100-150m and mid support of angle less than 25°.Each support is matched with one set
The broken strngth >15KN,The vertical holding strength >1.5KN
An extra U-4 shackle will be extra offered if you purchase a full set
| Type | cable size | single rods | |
| root | Wire diamet er(mm) | Length of finished product(mm) |
| LAXJ 1100 150 | 10.1 | 11 | 14 | 2.3 | 800 | green |
| LAXJ 1200 150 | 11.1 | 12 | 15 | 2.3 | 800 | yellow |
| LAXJ 1300 150 | 12.1 | 13 | 15 | 2.3 | 1000 | black |
| LAXJ 1400 150 | 13.1 | 14 | 16 | 2.3 | 1000 | purple |
| LAXJ 1500 150 | 14.1 | 15 | 16 | 2.9 | 1000 | red |
