ADSS Outdoor Overhead Self-Supporting 12 24 48 96 Core G652D Single Mode Aerial Fibra Optica Fiber Cable
Description
ADSS optical cable is an all-dielectric self-supporting aerial optical cable. It uses imported aramid yarn as a reinforcement, is filled
with grease and water-blocking yarn, and is extruded into an optical cable. ADSS optical cable's good electrical conductivity is
widely used in power lines, high voltage lines and various There are two types of telephone poles. One is a single sheath and
the other is a double sheath. According to the span and tension of the optical cable, choose a single sheath or a double sheath
ADSS.
ADSS Cable Characteristic
1.Cable be installed without shutting off the power;
2.Excellent AT performance.Maximum inductive at the operating point of AT sheath can reach 25KV;
3.Light weight and small diameter reducing the load caused by ice,wind,load on towers and backprops;
4.Large span lengths(Largest span is over 1000m)
5.Good performance of tensile strength and temperature;
6.Design life span is 30 years.
ADSS Cable Standards
ADSS cable complies with Standard IEE P 1222&IEC60794-1
ADSS Cable Applications
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead
power lines under 110KV,PE outer sheath is applied. For power lines equal to or over 110KV,AT outer sheath is applied. The
dedicate design of aramid quantity and stranding process can satisfy the demand on various spans.
ADSS Cable Optical Characteristics
| | | G.652 | G.655 | 50/125μm | 62.5/125μm |
| Attenuation(±20℃) | @850nm | | | ≤3.0dB/km | ≤3.0dB/km |
| @1300nm | | | ≤1.0dB/km | ≤1.0dB/km |
| @1310nm | ≤0.36dB/km | ≤0.4dB/km | | |
| @1550nm | ≤0.2dB/km | ≤0.23dB/km | | |
| Bandwidth(Class A) | @850nm | | | ≥500Mhz.km | ≥200Mhz.km |
| @1300nm | | | ≥1000Mhz.km | ≥600Mhz.km |
| Numerical Aperture | | | 0.200±0.015NA | 0.275±0.015NA |
| Cable Cut-off Wavelength λcc | ≤1260nm | ≤1480nm | | |
ADSS Cable Technical Parameters
| Ref. Outer Diameter(mm) | Ref. Weight kg/km | Ref. Daily Max Working Tension KN | Max Allowable Working Tension KN | Break Strength KN | Strength Member CSA mm2 | Modulus Of Elasticity KN/mm2 | Heat Expansion Coefficient ×10-6/k | Suitable Span(NESC Standard,m) |
| PE Sheath | AT Sheath | A | B | C | D |
| 12.5 | 125 | 136 | 1.5 | 4 | 10 | 4.6 | 7.6 | 1.8 | 160 | 100 | 140 | 100 |
| 13.0 | 132 | 142 | 2.25 | 6 | 15 | 7.6 | 8.3 | 1.5 | 230 | 150 | 200 | 150 |
| 13.3 | 137 | 148 | 3.0 | 8 | 20 | 10.35 | 9.45 | 1.3 | 300 | 200 | 290 | 200 |
| 13.6 | 145 | 156 | 3.6 | 10 | 24 | 13.8 | 10.8 | 1.2 | 370 | 250 | 350 | 250 |
| 13.8 | 147 | 159 | 4.5 | 12 | 30 | 14.3 | 11.8 | 1.0 | 420 | 280 | 400 | 280 |
| 14.5 | 164 | 177 | 5.4 | 15 | 36 | 18.4 | 13.6 | 0.9 | 480 | 320 | 160 | 320 |
| 14.9 | 171 | 185 | 6.75 | 18 | 45 | 22.0 | 16.4 | 0.6 | 570 | 380 | 550 | 380 |
| 15.1 | 179 | 193 | 7.95 | 22 | 53 | 26.4 | 18.0 | 0.3 | 670 | 460 | 650 | 460 |
| 15.5 | 190 | 204 | 9.0 | 26 | 60 | 32.2 | 19.1 | 0.1 | 750 | 530 | 750 | 510 |
| 15.6 | 194 | 208 | 10.5 | 28 | 70 | 33.0 | 19.6 | 0.1 | 800 | 560 | 800 | 560 |
| 16.3 | 211 | 226 | 12.75 | 34 | 85 | 40.0 | 20.1 | 0.1 | 880 | 650 | 880 | 650 |
| 16.8 | 226 | 242 | 15.45 | 41 | 103 | 48.0 | 24.0 | -0.4 | 1000 | 750 | 1000 | 760 |
| 17.2 | 236 | 253 | 16.2 | 45 | 108 | 51.0 | 25.1 | -0.5 | 1100 | 800 | 1100 | 830 |
| 17.9 | 249 | 266 | 18.0 | 50 | 120 | 58.8 | 26.1 | -0.8 | 1180 | 880 | 1180 |
Packing and Shipping
